4105 Chatham Hill Rd Winston-Salem NC 27104 US
Your Cart is Empty
There was an error with PayPalClick here to try again
Thank you for your business!You should be receiving an order confirmation from Paypal shortly.Exit Shopping Cart
|Posted on 4 February, 2014 at 8:53||comments (38)|
|Posted on 1 February, 2014 at 12:37||comments (1)|
After years of research and testing we are delighted to announce the release of our proprietary new product, SENTRY SEALER for 2014. Sentry Sealer is a revolutionary fire retardant and waterproofing deep penetrating solution that will extend the life of your deck or fence by up to 20 years. In stabilizing and densifing the wood it eliminates rot, mold, mildew, insect damage and other internal wood damage.
|Posted on 13 November, 2013 at 15:44||comments (0)|
Weather affects your exterior wood. Moreover, it also affects your restoration project. For example the wood must be below 15% moisture level to sand or stain. However, Seal-Once deck stain is best applied to moist wood surfaces. Please don't understand that is a controlled moisture level, not rain drops. The entire surface must have identical amounts of moisture. The result is a deeper richer looking stain. I gained this insight from staining hardwood floors -- where it is called "popping the grain". Just a little insight from our years of experience and training.
Additionally, wood staining should only be done between the temperatures of 50 and 90 degrees. Below 50 and the stain will not penetrate or actually thickens up. Above 90 and the stain will congeal or blotch on the wood. While these temperatures are air temperatures, the real concern is the surface temperature of the wood.
You may want to review the attached video to learn more about how weather affects your exterior wood.
|Posted on 12 February, 2013 at 13:58||comments (96)|
We are delighted to announce that this season will be offering SEAL-ONCE the lowest VOC deck sealer in the nation. The sealer can be tinted to provide additional UV protection, and almost any color scheme of deck you prefer. Seal-Once base materials are newly developed, environmentally stable, and safe polymers. When looked at under a microscope, these materials are much smaller and lighter than today’s market leaders. In fact, Seal-Once measures 100 times smaller than a micron, roughly equivalent to a fraction of a millionth of an inch. Consequently, when applied to a wood or concrete surface, Seal-Once permeates the external surface more deeply, thereby sealing and protecting the surface for a longer period of time. Please open and review the brochure below.